How to Fix JVC Bluetooth Pairing Problems

How to Fix JVC Bluetooth Pairing Problems?

Are you ready to give up your JVC vehicle audio because Bluetooth connection doesn’t work?

Have you exhausted all possibilities and are still unable to resolve the issue? If that’s the case, you won’t have to worry about it. We have all the information you need to discover a solution to your problem. Here you go!

Before we get to the remedies, we need to figure out what’s causing the problem. Due to a software error, a system slowness, or inappropriate pairing practices, an issue with the device’s ability to pair might occur.

Starting with the most prevalent faults, we’ll work our way down to the least common ones, starting with the user’s inability to link their JVC stereo to their iPhone or Android.

How to Connect Bluetooth to JVC Car Stereo

It’s simple to connect a JVC stereo to a mobile phone. Here’s how it works:

Pair iPhone to JVC Car Radio

To connect your iPhone to a JVC head unit, follow these instructions-

  • Turn on Bluetooth in the settings.
  • On the screen, you should be able to see a JVC stereo. That’s the one I want.
  • You should now see BT Pairing on the car stereo’s display screen.
  • Make sure both the stereo and the iPhone are protected with a password or PIN. Both must be identical.
  • Tap Ok on your iPhone after pressing the volume control knob on the stereo to confirm.

Pair Android Phone to JVC Stereo

Process-wise, it’s quite identical to what happens when you buy an iPhone. Go to the Bluetooth settings and turn it on. Search for devices that can be connected to.

Select the JVC Unit when it displays. If you don’t enter a security code, your phone will pair with the stereo and you won’t have to enter it again.

Follow the instructions and hit OK. There you go!

Some phones, on the other hand, may not be compatible with all sound systems. You may check here to see whether your phone is compatible.

How to Solve JVC Bluetooth Pairing Problems

How to Solve JVC Bluetooth Pairing Problems

Please follow these steps one by one if your JVC vehicle stereo Bluetooth is still not working after completing all of the steps above.

Method 1: Delete Paired Devices

Pre-existing pairings might pose issues from time to time. To repair Bluetooth connection troubles with your JVC vehicle audio if you have already linked many devices, use this procedure.

From wherever you are in the stereo, return to the source. Then, go to Settings, and look for the Bluetooth option. The Delete pairing option may be found in the Bluetooth settings.

You should be able to confirm the action by pressing Enter. As a result, turn up the volume one more time.

Despite the fact that most settings are identical, some newer models provide somewhat different alternatives. The Bluetooth settings and linked devices must be found and deleted regardless of how they are displayed.

There are some that need you to delete one at a time, while there are others that will remove all of the devices at once.

Method 2: Update Firmware

If the steps outlined above do not resolve the issue, you may want to consider upgrading the firmware on your JVC vehicle stereo.

You don’t have to worry about anything. JVC has a webpage where you may get the latest firmware. Choose the one that is tailored to your sound system and download it.

Use a USB flash drive to store your newly downloaded file. Connect the USB disk to the stereo and begin updating.

An instruction manual is included with each firmware update file. So, if you want to avoid bricking your device, I strongly advise you to stick with that advice. Doing a firmware upgrade incorrectly might cause your gadget to malfunction. Here’s where you want to exercise caution.

Method 3: Reboot the System

Try this step if the first two don’t work. When the system becomes clogged or slowed down, it might inhibit appropriate operation. If that’s the case, a restart of your computer may be beneficial.

Turn off the automobile, detach the negative battery terminal for a minute, then reconnect the negative battery terminal back to the car battery. Finally, start the car and observe if Bluetooth works as expected when the engine has been turned on.

Method 4: Reset the Head Unit

If the first three steps don’t work, use this drastic measure. As soon as you hear a beeping sound from within, push and hold the reset button for a few seconds till it does. After a short period of inactivity, the head unit will resume on its own.

Everything, including the JVC H/W problem, should now work more smoothly on your smartphone.

Forcible rebooting All data on the device will be deleted, and the device will be reset to its factory default settings. If you have a multimedia device, back up your data before installing this.

Final Verdict

Don’t worry if you’re having Bluetooth issues with your JVC vehicle audio. As previously said, there are a number of solutions that may help you resolve the issue and resume listening to your favorite music or podcasts in no time at all!

The best part about these techniques is that they simply require a few minutes of your time to complete. It’s time to give one of these approaches a try if you’ve been unable to connect your JVC Bluetooth device to your computer for hours on end!

Leave a Comment

Your email address will not be published.