Having a flat tire and being stranded on the side of the road is a terrible experience. You can fix this problem in under an hour if you know how to change car tires. Tire rotation is a simple activity that can be done by just about anyone if they follow some basic instructions. You can also improve your car’s performance by simply switching to a different set of tires. Tires on your car are worn down because you subject them to a lot of unsuitable situations. Alternating your tires will help them last longer and keep your automobile running smoothly.
Tire rotation is a simple way to get the most out of your vehicle. Easy tire swapping is guaranteed due to the manufacturer’s inclusion of all necessary equipment. If you need help replacing the tires on your automobile, here’s a comprehensive guide with pictures and explanations.
1. Place your car on a flat surface
You should park your car on a level, sturdy place to ensure its safety during the interchange process. It’s possible that you won’t be able to complete this job properly if you park your automobile on a slanted, soft surface. The hand brake must be used to keep the vehicle from skidding. A boulder or block placed in each tire might help keep the vehicle steady.
2. Release the nuts of the tire
Get out your lug wrench or wheel spanner and loosen the lug nuts on your car’s wheels. The spanner requires heavy pressure from your hand or feet. The nuts should be opened in a diagonal motion.
3. Use a jack to lift the car
Once the nuts are removed, the vehicle may be jacked up. Using proper jack placement and screw rotation, raise the tire at least an inch off the ground. To avoid hurting yourself or others, make sure to position the jack correctly under the automobile before raising it.
4. Remove the old tire
After the nuts have been loosened, the wheel can be lifted off by grasping it firmly and pulling up. To avoid harm, grasp the tire firmly with both hands.
5. Place the new tire
It’s time to put on a new tire after you’ve taken the old one off. The tire’s holes must line up with the rim’s holes for proper installation. The nuts can now be screwed onto the bolt and tightened. The wrench you used to loosen the nuts can also be used to tighten them. You shouldn’t finish tightening one nut before moving on to the next. Applying even pressure in a star pattern, tighten each nut until it is snug. In this manner, you may ensure that your tire is properly balanced. Using excessive force to tighten the nuts can ruin the threads and is not recommended.
6. Bring the car down
Assuming you’ve done everything right and tightened all the nuts, you can lower the vehicle. A cautious release of the jack’s screw will provide a safe and controlled descent of the vehicle. After setting the wheel in place, you can finish tightening the nuts and replace the hub cap. In other words, you can finally hit the road in your car. After that, you can put away the wrenches and go behind the wheel.
So, you don’t have to ask anyone for help when you need to change the tires on your automobile. The aforementioned procedures are useful whether you’re dealing with a flat tire while stranded or just want to swap out your tires for a new set to increase your vehicle’s longevity.
