Certainly, the beauty and elegance of the car’s exterior are high priorities for any car owner. Waxing the car is one of the most common ways to protect the outside from minor skin damages like scratches, stains, etc. Waxing isn’t a long-term solution, but it may be the best an owner can do right now.
Waxing may assist the owner make the automobile look nicer for less money, which is one of its best features. Car waxing is the last step in the detailing process, but there are other processes that must be completed first. While most people seek the services of a professional waxer, those who prefer to do it themselves may benefit from the following information.
- In a series of procedures, waxing comes last. Because of this, we stress once more that waxing is not enough to make your car’s outside look great. The user must first wash and then polish the car’s paint before applying wax.
- If there is any dirt or staining on the automobile’s exterior, the user should wash the car and remove it before polishing and waxing.
- Polishing the automobile after washing it is essential, so make sure to get a polish that complements the color of your car’s paint. Keep in mind that washing, buffing, and waxing each contribute equally to the final shine of your vehicle.
- Paste wax, spray wax, and liquid wax are the three main varieties on the market today. All waxes are not created equal, and their efficiency and versatility in use vary widely. Spray wax is the most convenient method of waxing, but it wears off quickly. However, liquid wax may last longer than spray wax despite being more difficult to apply. Paste wax, on the other hand, is the most laborious to apply but also the longest-lasting of the three types of waxes available.
Pre-requisite tools and materials
- Soft sponge
- Microfiber towel
- Wax pad
- Detailing brush
- Orbital buffer
Here is how to apply the wax on your car like a professional
Putting on auto wax is no simple process, but if you’re determined to do it yourself, here are the steps you need to take. Keep in mind that you risk owning an unsightly vehicle if you don’t adhere to the aforementioned procedures.
Step 1: To prepare a car for waxing, it must first be washed. Wash the automobile thoroughly using the right soap. Keep in mind that there are several soaps and cleaning techniques for the exterior of your vehicle. While the choice of soap is ultimately up to you, getting the outside of your automobile looking like new is crucial.
Step 2: After you’re done cleaning, grab a microfiber cloth and give the surface a quick wipe down to remove any moisture.
Step 3: Now check to see if the paintwork is smooth by running your hands over it; if you feel any rough scratches, a decontamination step with a clay bar should be performed. Don’t forget to use a cay bar that matches your paint color!
Step 4: If the paint is still damaged after decontamination and clay bar treatment, then you will need to polish the affected region very carefully. And, yes, we realize that these instructions may seem too basic right now, but bear in mind that they are essential if you aim for a high level of professionalism.
Step 5: Once the polish has been applied, buff the targeted area before it dries.
Step 6: When you’re done polishing, it’s time to move on to the final step: waxing the vehicle. Waxing the whole car is recommended, whereas polishing is just necessary in specific spots. You may choose among the three different waxes that were introduced at the outset. It is crucial, however, to apply at least three distinct layers.
Step 7: To start waxing, soak a wax pad in hot wax. Now, using circular, overlapping motions, wax the car’s surface. Although the benefits of using a circular motion to apply wax are debatable, we would advise solely using a circular motion because it allows the user to efficiently cover a large area with a little amount of wax. Added reminder: section off the car and wax it one part at a time. You don’t have to worry if the wax dries up while you’re waxing, unlike polishing.
Step 8: Now, let the wax fully dry, keeping in mind how crucial it is that it hardens as much as possible. Typically, drying time is no more than 15 minutes. The final color of the dried wax might range from clear to white. There’s no need to fret; that’s just what happens when wax hardens.
Step 9: When the wax has hardened, you’ll need to rub it gently. Buffing brings out the shine of a surface. This is why you need to take your time and polish the wax without applying too much pressure; instead, your hand movements should be loose and fluid. Buffing with too much vigor could make the situation worse by leaving behind additional scratches and swirl marks.
Stop the polishing process once you’ve covered the whole automobile, step back, and double-check the glossiness. If there are still rough spots, you’ll need to buff those areas again.
Tips for an efficient waxing
- Always use the best soap, fluid soap is best recommended
- Use a high-quality microfiber towel and not any other towels or sponges to wipe clean and dry the car
- Extreme cleanliness is what we need for maximum professional quality waxing
- Never do waxing and polishing in open space, do it under a roof with plenty of light.
- Select a premium or high-quality clay bar, polish, and wax
- If your car was already waxed by a professional, consider using a pre-wax cleaner before waxing again
People would have you believe that waxing is a difficult process if they could. In reality, if you care about your automobile and have the time, you can wax it on your own.
A reassuring sense of direction and purpose can be attained by reading the aforementioned advice and guidelines. If you follow the instructions to the letter, you should have no problems.